Proficiency Tests

TestQual 22C Nitrosamines in inflatable balloons (toy)

 

*Proficiency test not accredited*

Why participate in a proficiency test?

There are many reasons to schedule these quality controls, the participation in international proficiency tests helps laboratories detect improvements and ensure the results are reliable.

As of today, one of the main goals for any laboratory is increase its client’s trust in their analysis procedure and results obtained, checking that equipment, personel, solvents and all the steps and parts involved in the analysis are working as intented, providing trustworthy and realiable results.

As a laboratory its is now more important than ever to be able to obtain results with precision and accuracy to help your clients commercialice products safe for the end-user.

The continuous participation in proficiency tests can help you detect bias and check if any change or improvement made as an effect on the results obtained.

TestQual's international proficiency tests are a great and reliable service to help you check your results against laboratories from all around the world, helping you detect any deviation to correct it and ensure your clients continuous quality controls and improvements are being monitored by participating and checking your results against other laboratories.

 

Summary of the proficiency test

All the information about this PT can be found in the protocol, which can be downloaded from a link located in the right column of this page. 

This proficiency test will consist in a single round with a single sample.

The amount of sample to be distributed is 20-50 g of inflatable balloons will be distributed (cut/triturated to a powder or little pieces of similar dimensions).

If needed and justified, more amount of sample can be requested to the coordinator of the PT. Additional charges might apply.

For this proficiency tests the range of concentration for the target analytes might by between 5 and 100 µg/Kg .

The target standard deviation will be 25% for Nitrosamines (N-nitrosable results are not requested)

The presence of the following analytes is guaranteed and will require quantification:

N-Nitrosodiethylamine (NDEA)

N-Nitrosodimethylamine (NDMA)

 

The possible analytes to be detected and quantified are:

N-nitrosodibenzylamine (NDBzA)

N-Nitrosodipropylamine (NDPA)

N-nitrosodibutylamine (NDBA)

N-nitroso-N-ethyl-N-phenylamine (NEPhA) 

N-nitrosodiethanolamine (NDELA) 

N-Nitroso-N-methylethylamine (NMEA) 

N-Nitrosopyrrolidine (NPYR) 

N-nitrosomorpholine (NMOR)

N-nitrosodiisobutylamine (NDiBA) 

N-nitroso-N-methyl-N-phenylamine (NMPhA)

N-Nitrosodiisopropylamine (NDiPA) 

N-nitrosopiperidine (NPIP) 

 


PT Scheduled calendar

Check the right column of this page, in the “Dates” section.

 

PT development/calendar In our website appears as... Details

Application/

Participation request

 End of inscription ( reserve sample )

Deadline to reserve samples. If PT is useful** acceptance of participation is guaranteed

 Deadline to send applications

Deadline to request participation, if PT is useful** acceptance of participation depends on availability
Sample shipping Sample shipping

Date or range of dates when the samples will be distributed. If transit is more than 1 day, if possible, you should receive an email with the tracking code.

Deadline to submit results Final date to send results

Last day you can submit results, unless specified differently in instructions via TestQual's website. 

You can use Notes/Observations to report analytes that you detected/quantified.

In case of doubt send results or additional comments by email to coordinator.

Evaluation report Final Report

Evaluation in advance: One week after deadline to submit results, if you need or want to know your performance, contact us and we will send you the evaluation in advance. Useful if you need to know your performance quickly.

Date the evaluation report will be issued, if needed before check "evaluation in advance". 

*These dates are orientative and always will have to be checked in the protocol of the PT and the news in our webpage. Only participants inscribed in the proficiency test will receive the sample instructions/recommendations and the definitive date for the distribution of samples.

**PT is considered useful to a participant if a a certain % (internally determined according to our procedure) of present/spiked analytes will be studied.

 

Accreditation and standards

·Standars in which this proficiency test is based/accredited:

·UNE-EN ISO/IEC 17043:2010 General requirements for proficiency testing. (Proficiency test NOT ACCREDITED ). Check our scope of accreditation here.

·UNE-EN ISO/IEC 15328:2015 Statistical methods for use in proficiency testing by interlaboratory comparison

· HARMONIZED PROTOCOL FOR THE PROFICIENCY TESTING OF (CHEMICAL) ANALYTICAL LABORATORIES

 

Why international proficiency tests with TestQual?

·18 years of experience in proficiency tests since our foundation.

·Possibility, if previously requested and applies (Multi-method, single residues, different analyte families,etc.) , to issue independent reports per group of analytes (groups are decided by TestQual).

TestQual: our compromise is to allow you to check the quality of your results.

·International proficiency tests with participants from different countries (currently up to 5 continents).

·Transparency: Results from spiking and quality controls (homogeneity, stability) available for any participant that requests it.

·Expanding network of distributors to give a better client service, using local language and within your time zone. If your country still does not have a distributor, please, contact us, we can still accept your order.

·We take care of all aspects of the shipping, so you can focus on the analysis.

· We are available at any time and any direct consult to TestQual has an inferior response time of 24h (working days).

·We do not publish beforehand the price of shipping because we are constantly negotiating with providers and couriers to improve and adjust our prices. However, if you need a closed price in the quote and need to know the shipping costs, please, let us know and we will include it.

Our goal is offering you the best service, meet all your expectations so you are completely satisfied with our proficiency tests.

 

How to apply and get your laboratory code

Those laboratories that want to participate and are not registered on our website can register through this link: START REGISTRATION

If your laboratory is already registered on our website you can start your application by clicking the link situated at the top or bottom of this page, in PARTICIPATE, once you have logged in you will have to enter your Limit of Quantification (LOQ) for the parameters that have to be studied. The analytes with LOQ equal to NA (NOT ANALYSED) will NOT appear in the website when submitting the results of the PT.

Once the application has been sent, as soon as possible (usually 24h) you will receive an email with your laboratory code for the participation in the PT.

If your application is accepted and a laboratory code is granted, our compromise is that the proficiency test will be useful**.

**PT is considered useful to a participant if a a certain % (internally determined according to our procedure) of present/spiked analytes will be studied.

 

Contact us

If you have any doubt, if you want to get a quote or if we can help you in any other way, we are looking forward to helping you:

 

Email:  jpnavarro@testqual.com
Office phone: (+34) 868-94-94-86

Mobile phone

whatsapp available

(+34) 676-367-555

 

Thank you very much for your interest/trust in TestQual and our international proficiency tests.

If you want to receive a sample and participate click on the button "Participate" down below.

Dates

  • End of Inscription: -

  • Sample Shipping: -

  • Final date to send results: -

  • Final Report: -

Analisys